The two files, gcc1.40c.v1 and gcc1.40c.v2.Z, contain a Free Development
System Subset for Xenix 386.  The programs contained are: gcc, gdb, gas,
patch, ar, ranlib, flex, bison, byacc, and rcs, among others.  The diskettes
were sent to me by Ronald Khoo and Steve Bleazard and are made available
here "as is".

The two files, when converted back to diskettes, should be installed with
the SCO custom command.  Assuming you have placed these on your system with
the names above, do the following:

1. dd if=gcc1.40c.v1 of=/dev/fd096ds18
This will write the filke onto a diskette.  Use the correct /dev/fd* to match
your diskette.  The diskette must be formatted prior to this step.

2. zcat gcc1.40c.v2.Z | dd of=/dev/fd096ds18
This will uncompress the file and write it onto your diskette.

3. custom
This will add the application to your system.

Ron.
=============================================================================
| Ronald J. Srodawa               | Internet: srodawa@unix.secs.oakland.edu |
| School of Engineering and       | UUCP:     srodawa@egrunix.UUCP          |
|    Computer Science             |                                         |
| Oakland University              |                                         |
| Rochester, Michigan  48309-4401 |                                         |
| Phone: (313) 370-2247           |                                         |
=============================================================================